Applicable Documents; Labelling And Meanings Of Safety Notices And Warnings - IDEAL Bikes TARGET Instructions For Use Manual

2

Applicable documents

In addition to these instructions, always observe the additionally applicable manufacturer's
instructions for the components installed on your bicycle.
Any manufacturer's instructions for other components enclosed with these instructions
must also be observed. For example:
- Brakes
- Suspension fork and rear suspension
- Gear shift system
- Hubs/quick-release clamps
- etc.
As a supplement to these instructions, these manufacturer's component instructions form
an essential part of the scope of the technical documentation for this bicycle.
If you have not received separate manufacturer's component instructions, please contact
the manufacturer of your bicycle to ask for a copy.
3

Labelling and meanings of safety notices and warnings

Safety notices and warnings describe hazards that could occur when handling or using the
bicycle, and provide instructions on how to avoid such hazards.
The safety notices are summarised in the "SAFETY" section.
Warnings are placed next to the step or process from where the potential hazard arises.
In order to use the bicycle safely, it is imperative to heed the safety notices and warnings.
Therefore, you must read through all the safety notices and warnings very carefully and take
the contents on board in order to avoid risks when handling and using the bicycle. Safety
notices and warnings are indicated as follows in these instructions, based on the possible
consequences of failure to observe them.
ABOUT THESE INSTRUCTIONS
11