HAMPTON BAY 91655 Use And Care Manual page 10

Assembly - Hanging the Fan (continued)
5
Hanging the fan
WARNING: The hook is only to hold the fan while attaching
wiring. Failure to hang the fan properly by following these
instructions may result in the hook breaking, causing the fan
to fall. The hook must pass from inside to the outside of the
canopy.
□
Carefully lift the fan motor assembly (D) up to the mounting
bracket (A).
□
Seat the hanger ball portion of the ball/downrod assembly (B)
in the mounting bracket socket. Ensure that the tab on the
mounting bracket (A) socket is properly seated in the groove
in the hanger ball. If using close-to-ceiling mounting, hang the
fan on the hook provided by utilizing one of the holes at the
outer rim of the ceiling canopy (C).
6
Making the electrical connection
WARNING: Each wire nut supplied with this fan is designed to
accept up to one 12-gauge house wire and two wires from the
fan. If you have larger than 12-gauge house wiring or more than
one house wire to connect to the fan wiring, consult an electrician
for the proper size wire nuts to use.
WARNING:
Use the wire connecting nuts (BB) supplied with your
fan. Secure the connectors with electrical tape and ensure there
are no loose strands or connections.
□
Please refer to remote installation
instructions at the beginning of this
document.
A
C
D
MM
9
Please contact 1-855-HD-HAMPTON for further assistance.
OO
LL
NN
NN
HAMPTONBAY.COM
A
B
C
D