Premium Leisure GE 630 Owner's Manual page 11

export models) in the service panel.
Volts
Model
1230 240
1230CO 120
Model
1230-EX
WARNING: Disconnect electrical power before servicing. Before obtaining
access to terminals, all supply circuits must be disconnected.
WARNING: Test the GFCI (or RCD) before each use.
Parts with extra low voltage not exceeding 12v must be inaccessible to a person
in the hot tub. Earthed appliances must be permanently connected to fixed
wiring. Parts incorporating electrical components, except remote control devices,
must be located or fixed so that they cannot fall into the hot tub.
Means for disconnection must be used in fixed wiring in accordance with wiring
rules.
Important – To allow the 240V GFCI to function properly, connect the white
Neutral wire from the hot tub to the Neutral terminal on the GFCI breaker, not the
Neutral bus in the GFCI breaker box. An improperly connected Neutral causes
the GFCI breaker to trip.
*
Wire size may need to be reduced at GFCI to fit into the breaker
†
Solid copper
‡
Solid copper
Freq. Rating GFCI
(V) (Hz) (A)
60 30
60 12
Table 2 – Domestic Wire Size Chart
Volts Rating
(V) (A)
220- 1x32 IEE Wire
240 2x16 Regulation
Table 3 – Export Wire Size Chart
Our hot tubs are certified by Intertek Testing, SNAa Ltd.
Ontario, Canada to CSA-C22.2 No. 218.1-M89 and ANSI/UL
1563 standards.
For HELP, call 727.573.9611
Wire size from GFCI
(A) to Main Panel
8-2 plus ground
40
15 12-2 plus ground
RCD Wire size from RCD
(A) to Main Panel
5x1.5 mm
Page 9
*†
Equipment_
VS100Z
VS100Z
‡
2
3x4 mm
2
Pack
Equipment
Pack
GS100Z