Toshiba MMU-UP0071YHP-UL Service Manual page 19

No. Item
3 Room temp. 2) Using the Item code 06, the setup temperature in heating
control
(Continued)
SET DATA
Temperature setting adjustment
4 Automatic 1) Based on the difference between TA and Ts, the opera-
capacity control
5 Automatic 1) The judgment of selecting COOL/HEAT is carried out as
cooling/heating
control
2) For the automatic capacity control after judgment of
3) For temperature compensation of room temp. control in
Outline of specifications
operation can be compensated.
+0 ˚F
[+0˚C]
Setting at shipment
Model
Floor standing cabinet, Floor standing concealed,
Floor standing
Other models
tion capacity is determined by the outdoor unit.
Cooling
Ta (°F)
Ta
(°C)
+3.6 +2
SD
SB
+1.8 +1
S9
S7
Ts Ts
S5
S3 S0
–1.8 –1
shown below. When +2.7°F (+1.5°C) exceeds against Tsh
10 minutes and after thermostat OFF, heating operation
(Thermostat OFF) exchanges to cooling operation.
Description in the parentheses shows an example of
cooling ON/OFF.
Ta Ta
Cooling
(°C)
(°F)
+2.7 +1.5
Tsc
or
Tsh
(Cooling OFF)
-2.7 -1.5
When -2.7°F (-1.5°C) lowers against Tsc 10 minutes
and after thermostat OFF, cooling operation
(Thermostat OFF) exchanges to heating operation.
cooling/heating, see Item 4.
automatic heating, see Item 3.
0 2 4
+3.6 ˚F
+7.2 ˚F +10.8 ˚F
[+2˚C] [+4˚C] [+6˚C]
Set data
0
2
Heating
Ta (°F)
Ta
(°C)
+1.8 +1
S3 S0
S5
TS
Ts
S7
S9
-1.8
–1
SB
SD
–3.6 –2
SF
(Cooling ON)
Heating
- 19 -
Remarks
Shift of return air
temperature in heating
operation
6
Except while sensor of
the remote controller is
controlled
(Code No. [32], "0001")
Ts: Setup temp.
TA: Room temp.
∗ For Heat recovery
system outdoor unit
type
Tsc: Setup temp. in
cooling operation
Tsh: Setup temp. in
heating operation +
temp. compensation
of room temp. control