How To Select An Intersection Instead Of A House Number; Find In History; Find Coordinates - Pioneer AVIC-S2 Software Manual

Pioneer avic-s2: software guide

Hide thumbs Also See for AVIC-S2:

Table of Contents

Tip: If you do not know the house number, just press Done, and the midpoint of the

street will be used as the selected location.

6.2.1.4 How to select an intersection instead of a house number

If you do not know the house number or it is easier to pinpoint the location with an

intersection, press the Find intersection button in the top right corner and select the

desired street name from the list of available intersections of the previously selected

street (displayed in the top center of the screen). The crossing of the two streets will

be the selected point.

If you have used Find before, saved map points as POIs, or picked and used points

of the map before, they all appear in the History list.

The most recently used locations are always at the beginning of the list.

Pick any of the recent locations as your destination. The Next and Previous buttons

let you browse through the complete list to find your preferred location.

AVIC-S2 also lets you enter your destination by map coordinates. The coordinates

need to be in latitude/longitude format and, based on the WGS84 earth model (the

one used by most GPS devices).

Table of Contents