Distance Left; Method; Time Left; Estimated Arrival - Pioneer AVIC-S2 Software Manual

The red arrow representing your position will travel from the left to the right, giving
you visual feedback of your journey.
When you reach a via point, it becomes the starting point of the route, the past will
be deleted, the line with all the other via points will be modified instantly, and the
arrow jumps back to the left.
When the data corresponding to the entire route is displayed in the fields below, the
line is colored the same way as the route line shown on the map. When you see data
that belongs to a via point, the route is colored only up to that via point. The rest of
the line remains gray.

4.4.1.2 Distance Left

This value can also be displayed in one of the Route data fields on the Cockpit
screen as 'Distance to destination'. This is the distance you need to travel on the
route before reaching your final destination.
If via points exist, tap and tap again any of the fields to see the distance to reach the
first, second, etc. via point.

4.4.1.3 Method

This field shows how the route was calculated. It either displays the 'Route' or the
'Vehicle' field from the Route parameter settings. If you have chosen Car, Taxi, Bus
or Truck, the type of the route (Fast, Short or Economical) will be displayed here; if
you have selected Emergency, Bicycle or Pedestrian, this information will be
displayed here.

4.4.1.4 Time Left

This is an estimated value that can also be displayed in one of the Route data fields
on the Cockpit screen as 'Time to destination'. It shows the time needed to reach the
final destination of the route based on information available for the remaining
segments of the route. The calculation cannot take into account traffic jams and
other possible delays.
If via points exist, tap and tap again any of the fields to see the time needed to reach
the first, second, etc. via point.

4.4.1.5 Estimated Arrival

This is an estimated value that can also be displayed in one of the Route data fields
on the Cockpit screen as 'ETA to destination'. It shows the estimated arrival time at
the final destination of the route based on information available for the remaining
segments of the route. The calculation cannot take into account traffic jams and
other possible delays.
If via points exist, tap and tap again any of the fields to see the estimated arrival at
the first, second, etc. via point.
35