Voice Language; Advanced Settings; Regional Settings; Units - Pioneer AVIC-S2 Software Manual

Pioneer avic-s2: software guide

Hide thumbs Also See for AVIC-S2:

Table of Contents

restarted if you change this setting. AVIC-S2 will ask for confirmation before it

restarts.

5.5.2 Voice language

This button shows the current language of the voice guidance. By tapping the button

you can select from a list of available languages and speakers. Tap any of these to

hear a sample voice prompt. Just tap OK when you have selected the new spoken

language.

These screens let you set a large number of different advanced settings and initiate

some special functions. These settings and functions are divided into groups.

Tap on any button to set the corresponding parameters. They all open new windows

where you can make your desired changes.

Here you can set the measurement units, coordinate, date and time formats used by

AVIC-S2.

You can set the distance units to be used by the program. AVIC-S2 may not support

all of the listed units in some voice guidance languages. If you select a measurement

unit that is not supported by the chosen voice guidance language, you will see a red

warning message under the selector.

Positions are sometimes displayed with their addresses, and sometimes with their

coordinates. This setting lets you choose between displaying coordinates in degrees

(dd.dddddd); degrees and minutes (dd mm.mmm); or degrees, minutes and seconds

(dd mm ss.s).

Table of Contents