Whirlpool AKZM 662 User And Maintenance Manual page 12

Table of Contents

Advertisement

Available languages

Available languages

SETTING END OF COOKING TIME / DELAYED START
The end of cooking time can be set, delaying the start of cooking by up to a maximum of 23 hours and 59 minutes. This can only
be done once cooking time has been set. This setting is only possible when pre-heating is not required for the selected
function.
180°C
- 00:30
TEMPERATURE
COOK TIME
Conventional
No
19:20
Start
PREHEAT
END TIME
180°C
- 00:30
TEMPERATURE
COOK TIME
Conventional
No
20:10
Start
PREHEAT
END TIME
180°C
- 00:30
TEMPERATURE
COOK TIME
Conventional
No
20:10
Start
PREHEAT
END TIME
After setting cooking time, the display shows the end of cooking time (for example 19:20). To delay the end of cooking time, and
thus also the cooking start time, proceed as follows:
1.
Turn the "Browse" knob to position the cursor at the end of cooking time.
2.
Press button
to select the setting: the end of cooking time flashes.
3.
To delay the end of cooking time, turn the "Browse" knob to set the desired value.
4.
Confirm the selected value by pressing button
5.
Turn the "Browse" knob to position the cursor at START and then press
6.
The display indicates which shelf food should be placed on. Do as instructed and press
start cooking after a period of time calculated so as to finish cooking at the set time (for example, in the case of a dish
which requires a cooking time of 20 minutes, if the end of cooking time is set to 20:10, the oven will begin cooking at
19:50).
N.B.: during the interval before cooking starts, the oven can in any case be switched on by turning the "Browse" knob to
position the cursor at "Start" and then pressing
At any time, set values (temperature, grill setting, cooking time) can be changed as described in previous paragraphs.
INDICATION OF THE RESIDUAL HEAT INSIDE THE OVEN
168°
Residual Heat
If at the end of cooking, or when the oven is switched off, the temperature inside the oven is over 50°C, the display shows the
current temperature and the bar indicating cooling in progress. When the residual heat reaches 50°C, the display shows the
current time.
TIMER
00 : 00 : 00
(HH)
(MM)
(SS)
Turn +/- to set Timer, ✓ to Start
This function can be used only with the oven switched off and is useful, for example, for monitoring the cooking time of pasta.
The maximum time which can be set is 1 hour 30 minutes.
1.
With the oven switched off, press button
2.
Turn the "Browse" knob to select the desired time.
3.
Press button
to start the countdown. When the set time has elapsed, the display will show "00:00:00" and an acoustic
signal will sound. At this point the time can be prolonged, proceeding as described above, or the timer can be deactivated
by pressing button
180°C
TEMPERATURE
Conventional
No
Start
PREHEAT
180°C
TEMPERATURE
Conventional
No
Start
PREHEAT
180°C
TEMPERATURE
Conventional
No
Start
PREHEAT
.
19:42
00 : 30 : 00
(HH)
(MM)
(SS)
Turn +/- to set Timer, ✓ to Start
: the display will show "00:00:00".
(the time of day will be shown on the display).
- 00:30
COOK TIME
19:20
END TIME
- 00:30
COOK TIME
20:10
END TIME
- 00:29
COOK TIME
20:10
END TIME
.
.
01 : 09 : 00
GB10
to start cooking. The oven will
Timer

Advertisement

Table of Contents
loading

Table of Contents