Table of Contents
Advertisement
1886
Put the blade washers, found in the
blade screws, found in the
hardware bag. Then install the blade
screws to secure each blade to a blade iron.
Repeat x5
7
Ceiling Bracket
Installing the Canopy
Lift the canopy into place so that
the screw holes are aligned.
Installing the Blades:
hardware bag, onto the
Note:
Fan style may vary.
Downrod
Hanging Fan
Insert the two canopy screws
found in the
Lightly attach the blade arms to the motor with
the blade arm screws, then securely tighten
after both screws are attached.
Wiring
Canopy
hardware bag.
Canopy Screw
bag
Blade Screw
bag
Washer
bag
Note:
Fan style may vary.
Remember the screws that you
kept after removing the shipping
blocks? You need them here.
Blade Arm Screw
Repeat x5
Blades
Light
x2
x15
x15
x10
Bulbs/Glass
Advertisement
Table of Contents
