Adjusting Loudness; Using Subwoofer Output; Boosting The Bass - Pioneer Super Tuner IIID AVH-P4100DVD Operation Manual

Audio Adjustments
Custom Custom
Flat
Flat
Super Bass Super bass
# Custom is an adjusted equalizer curve that
you create. If you make adjustments to an equali-
zer curve, the equalizer curve setting is memor-
ized in Custom.
# When Flat is selected, no supplement or cor-
rection is made to the sound. This is useful to
check the effect of the equalizer curves by switch-
ing alternatively between Flat and a set equalizer
curve.
3 Touch c or d on Band to select the
equalizer band to adjust.
Low (low)—Mid (mid)—High (high)
4 Touch c or d on Frequency to select
the frequency to adjust.
Low: 40Hz—80Hz—100Hz—160Hz
Mid: 200Hz—500Hz—1kHz—2kHz
High: 3.15kHz—8kHz—10kHz—12.5kHz
5 Touch c or d on Q.Factor to select the
Q factor.
2Wide—1Wide—1Narrow—2Narrow
6 Touch a or b to adjust the level of the
equalizer band.
+12 to –12 is displayed as the level is in-
creased or decreased.
# You can then select another band and adjust
the level.

Adjusting loudness

Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Touch Loudness on the audio function
menu.
2 Touch d to turn loudness on.
# To turn loudness off, touch c.
3 Touch c or d to select a desired level.
Low (low)—Mid (mid)—High (high)

Using subwoofer output

This unit is equipped with a subwoofer output
which can be turned on or off.
! When the subwoofer output is on, you can
adjust the cut-off frequency and the output
level of the subwoofer.
1 Touch Subwoofer on the audio function
menu.
2 Touch d next to Subwoofer to turn sub-
woofer output on.
# To turn subwoofer output off, touch c.
3 Touch c or d next to Phase to select
the phase of subwoofer output.
Touch d to select normal phase and Normal
appears in the display. Touch c to select re-
verse phase and Reverse appears in the dis-
play.
4 Touch c or d next to Level to adjust
the output level of the subwoofer.
+6 to –24 is displayed as the level is increased
or decreased.
5 Touch c or d next to Frequency to se-
lect cut-off frequency.
Each time you touch c or d selects cut-off fre-
quencies in the following order:
50Hz—63Hz—80Hz—100Hz—125Hz
Only frequencies lower than those in the se-
lected range are outputted from the sub-
woofer.

Boosting the bass

Bass boost function boosts the bass level of
sound.
1 Touch Bass Booster on the audio func-
tion menu.
2 Touch c or d to select a desired level.
0 to +6 is displayed as the level is increased or
decreased.
Section
13
43
En