Power On/Off; Basic Operations Power On/Off; Turning The Unit On; Turning The Unit Off - Pioneer Super Tuner IIID DEH-P7100BT Operation Manual

Basic Operations

Power ON/OFF

Turning the unit on

% Press SRC/OFF to turn the unit on.

Turning the unit off

% Press SRC/OFF and hold until the unit
turns off.

Selecting a source

You can select a source you want to listen to.
To switch to the built-in CD player, load a disc
in the unit. Refer to page 17.
% Press SRC/OFF repeatedly to switch be-
tween the following sources.
XM tuner (XM tuner)—SIRIUS (SIRIUS tuner)
—HD Radio (HD Radio tuner)—Tuner (tuner)
—DVD (DVD player/multi-DVD player)—CD
(built-in CD player)— Multi CD (multi-CD
player)—iPod (iPod connected with the inter-
face adapter)—USB1 (USB storage device 1)/
iPod1 (iPod connected using USB input 1)—
USB2 (USB storage device 2)/iPod2 (iPod con-
nected using USB input 2)—External1 (exter-
nal unit 1)—External2 (external unit 2)—
AUX1 (auxiliary unit 1)—AUX2 (auxiliary unit
2)—BT Audio (Bluetooth audio)
Notes
! In the following cases, the sound source will
not change.
— When no unit corresponding to the se-
lected source is connected.
— When there is no disc or magazine in the
player.
— When the iPod is not connected to this
unit with the interface adapter.
— When AUX (auxiliary input) is set to off
(refer to page 49).
— When the BT Audio source is set to off
(refer to Activating the BT Audio source on
page 51).
— When an USB storage device or iPod is not
connected to the USB port of this unit,
NO DEVICE is displayed.
! If the HD Radio tuner is connected to this
unit, tuner source is skipped.
! USB1/iPod1 and USB2/iPod2 are the same
operations. However, sources are different de-
pending on the terminal which has been con-
nected to.
! AUX1 is set to on by default. Turn off the AUX1
when not in use (refer to Switching the auxili-
ary setting on page 49).
! Charging the portable audio player using
car's DC power source while connecting it to
AUX input may generate noise. In this case,
stop charging.
! External unit refers to a Pioneer product (such
as ones available in the future) that, although
incompatible as a source, enables control of
basic functions with this unit. Two external
units can be controlled with this unit. When
two external units are connected, the external
unit is automatically allocated to external unit
1 or external unit 2 by this unit.
! When this unit's blue/white lead is connected
to the vehicle's auto-antenna relay control
terminal, the vehicle's antenna extends when
this unit's source is turned on. To retract the
antenna, turn the source off.

Adjusting the volume

% Turn MULTI-CONTROL to adjust the
sound level.
Section
03
13
En