Changing Audiobook Speed; Using Itunes Tagging; Storing The Tag Information To This Unit; Storing The Tagged Information To Your Ipod - Pioneer Super Tuner IIID DEH-P7100BT Operation Manual

Playing songs on iPod
! Fast forward/reverse
! Track up/down
! Pausing
! Switching the text information
Notes
! You can also turn this function on or off in the
menu that appears by using
MULTI-CONTROL.
! Two iPod can be connected simultaneously to
this unit. Settings are common in iPod1 and
iPod2.
! When the control mode is set to iPod, opera-
tions are limited as follows:
— Functions other than Control mode (con-
trol mode), Pause (pause) and
Sound Retriever (advanced sound retrie-
ver) cannot be selected.
— The volume can only be controlled from
this unit.
! Turning this function on pauses song play-
back. Operate the iPod to start playback.

Changing audiobook speed

While listening to an audiobook on iPod, play-
back speed can be changed.
1 Display the function menu.
Refer to Introduction to advanced operations
on page 25.
2 Use MULTI-CONTROL to select
Audiobooks in the function menu.
3 Press MULTI-CONTROL to select your fa-
vorite setting.
Press MULTI-CONTROL repeatedly until the
desired setting appears in the display.
! Faster – Playback faster than normal speed
! Normal – Playback in normal speed
! Slower – Playback slower than normal
speed

Using iTunes tagging

This function can be operated with the following
iPod models.
— iPod fifth generation
— iPod nano third generation
— iPod classic
However, tag information can be stored in this
unit even while the other iPod models are used.
It is possible to save the song's information
(tag) from iPod connected to this unit to your
iPod. The songs will show up in a playlist
called "Tagged playlist" in iTunes the next time
you sync your iPod. Then you can directly buy
the songs you want from iTunes Music Store.
Storing the tag information to
this unit
1 Play songs on the iPod.
2 Press and hold MULTI-CONTROL if TAG
is indicated in the display while desired
song is playing.
# While storing the tag data on this unit, TAG
flashes.
3 When completed, TAG Stored and
are displayed.
Storing the tagged information
to your iPod
1 Use MULTI-CONTROL to select
Tags transfer in the function menu.
2 Press MULTI-CONTROL to start transfer-
ring the tag to the iPod.
# While transferring the tag,
Transferring to iPod is displayed. In this period,
do not operate this unit.
# If there are no tags in the connected iPod, No
tags data is displayed and this function cannot
be performed.
3 When completed, Tags transferred to
iPod. is displayed and tagged informations
are stored on your iPod.
Note
You can also perform this operation by selecting
iPod1/iPod2 from other source. Refer to Storing
the tagged information to your iPod on page 15.
Section
07
27
En