Sony SRS-XB3 Help Manual page 29

Personal audio system

Hide thumbs Also See for SRS-XB3:

Table of Contents

Hint

If you cannot connect the speaker, try the following.

Start the app on the device and move the device slowly over the N marked part of the speaker.

If the device is in a case, remove the case.

Make sure that the app screen is displayed on the device.

If you touch a device on the speaker, the device terminates the BLUETOOTH connection with the current device (NFC-compatible headset, etc.),

and connects with the speaker (One-touch connection switching).

When using the Speaker Add function, touch the speaker where the

connection with the speaker where the

Note

When an audio cable is connected to the speaker's AUDIO IN jack while the speaker and the BLUETOOTH device have been connected via

BLUETOOTH connection, sound from the BLUETOOTH-connected device is not output from the speaker (the hands-free function is available). To

listen to music from the BLUETOOTH device, disconnect the audio cable from the speaker's AUDIO IN jack.

If your smartphone is a type that goes into standby mode in response to magnetic force, it may not be able to connected by NFC.

Related Topic

Disconnecting the NFC-compatible device by One-touch (NFC)

Switching devices by One-touch (NFC)

Listening to music of a device via BLUETOOTH connection

Listening to music wirelessly with two speakers (Speaker Add function)

(BLUETOOTH) indicator is lit. The device cannot make a BLUETOOTH

(BLUETOOTH) indicator is turned off.

Table of Contents