LG UltraFine 65EP5G Owner's Manual page 39

[Zoom]
Zoom into the current external input image.
• [2x Zoom]: The original image is enlarged 2x by dividing the external input into a 2 x 2 grid.
• [3x Zoom]: The original image is enlarged 3x by dividing the external input into a 3 x 3 grid.
• [4x Zoom]: The original image is enlarged 4x by dividing the external input into a 4 x 4 grid.
• [5x Zoom]: The original image is enlarged 5x by dividing the external input into a 5 x 5 grid.
* Supported External Input: HDMI1 - 2, SDI1 - 4, SFP+, SDI Dual Link, Quad Link, Quad View
* When selecting a zoom factor, a square is drawn over the image, indicating the area on which to zoom in.
- Turn the Dial key or use the Up / Down keys on the remote control to change the area on which to zoom in.
- When the Dial key or the OK key on the remote control is pressed, the selected area is enlarged, and the zoom
factor with the currently zoomed area is displayed in the lower left corner of the screen.
- With the image enlarged, turn the Dial key or use the Up / Down keys on the remote control to change the area on
which to zoom in.
- When using the Dial key, turn to the right (clockwise) to move to the right and turn to the left (counter-clockwise)
to move to the left.
- When using the remote control, press the Down / Right keys to move to the right and the Up / Left keys to move to
the left.
- Pressing the Down key while the image is enlarged restores the image and returns to the screen for area selection.
- Pressing the Exit key on the remote control while the image is enlarged closes the zoom settings menu and
restores the image.
NOTE
• The [Zoom] feature cannot be used without a signal or in unsupported resolutions.
• When [Zoom] is applied and GPI signals are entered, the features mapped to the GPIs are as follows:
- Undefined: No action.
- Power Key: Turns power on / off.
- Input Device: Removes [Zoom] and switches input to the corresponding input. If it is the same as the current
input, only [Zoom] is removed.
- Menu Key, Enter Key, Up / Down Key
- Function Key: Removes [Zoom] and executes the feature mapped to the [Function Key].
- [Over Scan], [Aspect Ratio], [Waveform]: Removes [Zoom], returns to the previous screen before applying
[Zoom], and runs the corresponding feature.
39