[Over Scan]
Select a scan mode for image output.
•
[Zero Scan]: Displays 100 % of the original image size.
•
[Over Scan]: Displays 95 % of the original image size.
•
[Under Scan]: Displays 105 % of the original image size.
NOTE
• [Over Scan] is deactivated when any of the features below have been enabled.
- [HDR / SDR Monitoring]
- [Internal Pattern]
- [PBP]
When deactivated, [Over Scan] is set to [Zero Scan].
[Over Scan] returns to the setting previously set by the user upon reactivation.
• [Over Scan] may work differently depending on the [Screen Shift] settings.
• When using [PIP], this feature applies only to the main screen.
37