Next steps
1. Install the battery.
2. Install the
base
cover.
3. Install the
microSD
card.
4. Follow the procedure in
Solid state drive bracket
Removing the solid state drive bracket
Prerequisites
1. Follow the procedure in
2. Remove the
microSD
card.
3. Remove the
base
cover.
4. Remove the battery.
Steps
1. Remove the single (M2x3) screw that secures the bracket to the palmrest [1].
2. Lift the SSD bracket of the slot on the palmrest [2].
After working on your
computer.
before working with your
computer.
Removing and installing components
35