Table of Contents
Advertisement
9. Remove the
Coin cell
battery.
10. Remove the
Inner
frame.
11. Remove the heatsink.
12. Remove the
system
fan.
13. Remove the speaker.
14. Remove the
LED
board.
15. Remove the
system
board.
16. Remove the keyboard.
Steps
1. Remove the six (M2x2) screws that secure the keyboard to the keyboard bracket [1].
2. Remove the keyboard from the keyboard bracket [2].
Installing the keyboard bracket
Steps
1. Align and place the keyboard on the keyboard bracket [1].
2. Replace the six (M2x2) screws to secure the keyboard on the keyboard bracket [2].
Next steps
1. Install the keyboard.
2. Install the
system
board.
3. Install the
LED
board.
4. Install the speaker.
5. Install the
System
fan.
6. Install the Heatsink.
7. Install the
Inner
frame.
8. Install the
coin cell
battery.
9. Install the DC-in.
10. Install the
memory
module.
11. Install the WLAN.
12. Install the WWAN.
13. Install the battery.
14. Install the
base
cover.
15. Install the
microSD
card.
16. Follow the procedure in
Power button
Removing the power button
Prerequisites
1. Follow the procedure in
2. Remove the
microSD
card.
3. Remove the
base
cover.
4. Remove the battery.
5. Remove the WWAN.
6. Remove the WLAN.
7. Remove the
memory
module.
8. Remove the
DC-in
port.
9. Remove the
Coin cell
battery.
10. Remove the
Inner
frame.
After working on your
computer.
before working with your
computer.
Removing and installing components
71
Advertisement
Table of Contents
