Table of Contents
Advertisement
3. Remove the
base
cover.
4. Remove the battery.
5. Remove the WWAN.
6. Remove the WLAN.
7. Remove the
memory
module.
8. Remove the
DC-in
port.
9. Remove the
Coin cell
battery.
Steps
1. Lift the latch and disconnect the backlit cable and the keyboard cable from the connectors on the touchpad.
2. Remove the M2x2.5 screws that secure the keyboard to the palmrest [1].
3. Remove the keyboard away from the computer [2]. The touchpad FFC covers one of the screws that secure the keyboard assembly
to the palmrest.
Removing and installing components
67
Advertisement
Table of Contents
