Table of Contents
Advertisement
06/03/06 13:43:43 3CMCJ600_042
COOLANT
Coolant Recommendation
The owner must properly maintain the
coolant to prevent freezing, overheating,
and corrosion. Use only high quality
ethylene glycol antif reeze containing
corrosion protection inhibitors specifically
recommended for use in aluminum engines.
(SEE ANTIFREEZE CONTAINER LABEL).
Use only low-mineral drinking water
or distilled water as a part of the
antifreeze solution. Water that is high
in mineral content or salt may be
harmful to the aluminum engine.
Using coolant with silicate inhibitors
may cause premature wear of water
pump seals or blockage of radiator
passages.
Using tap water may cause engine
damage.
36
The factory provides a 50/50 solution of
antifreeze and distilled water in this
motorcycle. T his coolant solution is
r e c o m m e n d e d f o r m o s t o p e r a t i n g
temperatures and provides good corrosion
protection. A higher concentration of
antifreeze decreases the cooling system
performance and is recommended only
when additional protection against freezing
is needed. A concentration of less than 40/
60 (40% antifreeze) will not provide proper
corrosion protection. During freezing
temperatures, check the cooling system
frequently and add higher concentrations of
antifreeze (up to a maximum of 60%
antifreeze) if required.
Advertisement
Table of Contents
