06/03/06 13:42:43 3CMCJ600_033
Rear Suspension
Rebound damping:
To reduce (SOFT) :
Turn the adjuster counterclockwise toward
SOFT for a light load and smooth road
condition.
To increase (HARD) :
Turn the adjuster clockwise toward HARD
for a firmer ride and rough road condition.
To adjust the adjuster to the standard
position, proceed as follows:
1.
Turn the damping adjuster ( ) clockwise
until it will no longer turn (lightly seats).
This is the full hard setting.
2.
The adjuster is set in the standard
position when the adjuster is turned
counterclockwise approximately
so that its punch mark ( ) aligns with the
reference punch mark ( ).
1
(1) Damping adjuster
(2) Punch mark
2
turn
2
3
(1)
(3)
(2)
(3) Reference punch
mark
27