Table of Contents
Advertisement
06/03/06 13:42:56 3CMCJ600_035
Spring preload:
The spring preload adjuster ( ) has
9
spring preload positions for different
load or riding conditions.
Use the pin spanner ( ) and extension bar
( ) to adjust the rear shock. Positions
3
1
are for a light load and smooth road
conditions. Position
position. Positions
5
preload for a stiffer rear suspension and can
be used when the motorcycle is more
heavily loaded.
(2)
(3)
(1) Spring adjuster
(2) Pin spanner
1
The rear shock absorber assembly
includes a damper unit that contains
2
high pressure nitrogen gas. The
3
to
instructions found in this owner's
manual are limited to adjustment of
4
is the standard
the shock assembly only. Do not
to
9
increase spring
attempt to disassemble, disconnect or
service the damper unit; an explosion
causing serious injury may result.
Puncture or exposure to flame may
also result in an explosion, causing
(1)
serious injury.
Service or disposal should only be
done by your Honda dealer or a
qualified mechanic, equipped with
the proper tools, safety equipment
9
and the official Honda Shop Manual.
8
7
6
5
5
1
1
2
2
3
3
4
4
(3) Extension bar
29
Advertisement
Table of Contents
