Download Print this page

Eaton IZM Instructional Leaflet page 2

Auxiliary switch kit in low voltage circuit breakers

Advertisement

Instructional Leaflet IL0131170EN
Effective December 2021
Wire auxiliary switches per Table 1 and wire markings.
Step 4:
Terminal 49
Figure 3. Step 4
N
ote:
Securely tie wires away from moving parts.
Table 1. Auxiliary Switch Secondary Wiring
Auxiliary Switch
Position
#1
Contacts 49–60
#2
Contacts 61–72
#3
Contacts 73–84
Step 5: Reinstall front cover removed in Step 1.
Terminal 84
Eaton Industries GmbH
Hein-Moeller-Straße 7-11,
53115 Bonn,
Germany
Eaton.com
© 2021 Eaton Industries GmbH
All Rights Reserved
Printed in Germany
Publication No. IL0131170EN
Effective December 2021
IZM low voltage circuit breakers
Disclaimer of warranties and
limitation of liability
The information, recommendations, descriptions, and safety
notations in this document are based on Eaton Corporation's
("Eaton") experience and judgment, and may not cover all
contingencies. If further information is required, an Eaton sales
office should be consulted.
Sale of the product shown in this literature is subject to the terms
and conditions outlined in appropriate Eaton selling policies or other
contractual agreement between Eaton and the purchaser.
THERE ARE NO UNDERSTANDINGS, AGREEMENTS,
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING
WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR
MERCHANTABILITY, OTHER THAN THOSE SPECIFICALLY SET
OUT IN ANY EXISTING CONTRACT BETWEEN THE PARTIES. ANY
SUCH CONTRACT STATES THE ENTIRE OBLIGATION OF EATON.
THE CONTENTS OF THIS DOCUMENT SHALL NOT BECOME
PART OF OR MODIFY ANY CONTRACT BETWEEN THE PARTIES.
In no event will Eaton be responsible to the purchaser or user in
contract, in tort (including negligence), strict liability, or otherwise
for any special, indirect, incidental, or consequential damage or loss
whatsoever, including but not limited to damage or loss of use of
equipment, plant or power system, cost of capital, loss of power,
additional expenses in the use of existing power facilities, or claims
against the purchaser or user by its customers resulting from the
use of the information, recommendations, and descriptions
contained herein.
The information contained in this manual is subject to change
without notice.
Auxiliary switch kit in
Eaton is a registered trademark.
All other trademarks are property of their
respective owners.

Advertisement

loading