WebSTAR DPR2320 and EPR2320 Gateway Cable Modems User's Guide
Back Panel Description
The following illustration describes the back panel components of the DPR2320 and the EPR2320.
T10947
8
ANTENNA— Provides a communication connection for the
1
built-in wireless access point (WAP) to allow wireless devices
to communicate with the cable modem
POWER—Connects the cable modem to the DC output of the
2
1
AC power adapter that is provided with your cable modem.
Avoid damage to your equipment. Only use the AC
power adapter and power cord that is provided with
your cable modem.
2
3
RESET—Reset-to-Default button (Factory Reset)
3
4
This button is for maintenance purposes only.
Do not use unless directed to do so by your service provider.
5
ETHERNET—RJ-45 Ethernet port connects to the Ethernet
4
port on your PC or your home network
USB—12 Mbps USB port connects to the USB port on your
5
PC
6
CABLE—F-Connector connects to an active cable signal
6
from your cable service provider
CAUTION: