1. SAFETY INSTRUCTIONS WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. a) Recharge only with the charger specified by the manufacturer.
Page 6
the product. The battery pack for this tool has been shipped in a low charge condition. You should charge the battery pack fully before use. Do not incinerate the battery pack even if it is seriously damaged or can no longer hold a charge. The battery pack can explode in a fire.
Page 7
immediately discontinue its use and do not recharge it. Do not store or carry a spare battery pack in a pocket or toolbox or any other place where it may come into contact with metal objects. The battery pack may be short-circuited causing damage to the battery pack, burns or a fire.
Charge level indicator Charge level indicator button 3. OPERATION Battery pack Charger (Not included) EZB2A EZCR20V-1 EZB4A 3.1 CHARGING THE BATTERY PACK IMPORTANT: The battery pack is not fully charged at the factory. Before attempting to charge them, thoroughly read all of the safety instructions.
To charge the battery pack after a six months storage period, it is recommended to discharge the battery about 0%-20% (by running it in a tool) and charge afterwards to maximize the battery lifetime. 5. TECHNICAL SPECIFICATIONS Model EZB2A EZB4A Voltage 20V d.c. 20V d.c.
6. SYMBOLS EXPLANATION Do not dispose of old appliances with domestic rubbish. Conforms to relevant safety standards. Do not expose batteries to temperatures exceeding 40 degrees. Do not dispose of batteries in fire. They could explode and cause injury. Do not dispose of batteries in water. Recycling.
8. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor.
9. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank if your product has one. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine.
10. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...