NEED HELP?
DO NOT RETURN TO STORE. PLEASE VISIT US AT:
www.polygroupstore.com
2.2 m / 7.5 ft EZ Connect™ Pre-lit Slim Color Blast
ITM. / ART.
8525282
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
For assistance with assembly, parts and customer service, call (US & Canada only): 1-888-919-0070 (English, Spanish, French) at
10am-7pm, Mon-Fri,
Eastern Standard
Please note if you are calling outside of USA & Canada, international toll fees may apply.
Customer Service Hotline Hours: 8am-5pm, Mon-Fri, MST.
TREE ASSEMBLY INSTRUCTIONS
This tree comes with Quick Set® technology - allowing you to set up your tree and light it up in minutes! Carefully follow the
instructions below on how to quickly and easily set up your new tree:
1. Choose a level surface near a wall outlet.
2. Assemble the tree stand (See Fig. A).
Fig. A - Tree Stand Assembly
Fig. B - Tree and Light Assembly
3. Identify all tree sections (See Fig. B) by the stickers on them, and start assembling from bottom to top.
4. Open the protective cap of pole, and insert the pole into the stand. Allow all branches fall down into place. Check to make sure
that all wires are free from branch hinges.
5. Shape the tree section one branch at a time. Start with the tips closest to the pole and move outwards. Fan all the tips out in
alternating directions, and slightly upsweep them for a natural look (See Fig.
Fig. C
Top view
MODEL #:
TG76P4826P15
1-888-919-0070
OR
Time, email: warranty@polygroup.com, or visit www.polygroupstore.com.
Click
Tree Top
Section 2
Section 1
Side view
Pull apart the legs of the stand so that they
are snapped into an x-shape, place the tree
stand on a level surface.
To close the stand, press the metal button
and fold the legs together.
*Electrical Rating For The Tree
FR (K25V240104G)
Insert Green
Label Extension
Cord into Adapter
C).
Page: 1 of 6
Aspen Tree
TM
(For Indoor Use Only)
Frequency Bands: 433.92 +/-0.5MHz
Maximum output power: 1.0mW
Input: 100-240VAC, 50/60Hz, 0.6A
Output: 24V DC 1.04A
Do not tamper with
internal parts
Open the
cap cover
Align both arrows
in a straight line
before sliding
down to connect
Adapter
To Be Plugged
Into Wall
Outlet