Polygroup TG76P4870C00 Assembly Instructions

TREE ASSEMBLY INSTRUCTIONS

Congratulations on purchasing your new tree from
Carefully follow the instructions below on how to quickly and easily set up your new tree.
Fig. A - Tree and Light Assembly
Section 2
Quick Fold TM Cinch
Section 1
Quick Fold TM Cinch
• Before you start to assemble your tree, choose an appropriate location near a wall outlet.
• Do not plug the extension cord into the wall outlet while it in the packaging.
• Assemble the tree stand and place on a level surface. (See Fig. B)
Fig. B - Tree Stand Assembly
SET UP INSTRUCTIONS WITH QUICK FOLD
1
Section 2
Section 1
Section 3
Each tree section is numbered
with a tag. Please identify all
sections before assembling.
MODEL #: TG76P4870C00
Polygroup®!
Section 3
Quick Set®
Connections
2
Section 1
Insert Section 1 into the tree stand.
Do Not Tamper
Internal Parts
Open the
protective
cover
Quick Set®
Connections
Insert
Green Label
Foot Pedal
Plug Into Wall
on/off Switch
Outlet
Unfold the legs and lay the
stand in a flat area. Then slide
the locking disc downward and
snap into place.
TM
3
A
Cinch
Handle
Cinch Clip B
C
A. Locate "Pull Here" tab and corresponding
Cinch Handle
B. Hold Cinch Clip firmly with one hand and
press down on clip
C. With Cinch Clip depressed, pull clip away from
tree until all branches are released.
1
Do Not Tamper
Internal Parts
Open the
protective
cover