Functionality - KENT CWP 1525 Instruction Manual

Date: 18/4-2017
© Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc

1.2 Functionality:

Section of 3 cyl. pump piston cycle.
Pump:
3-cylinder, vibrationless and noiseless, oil bath lubricated high-pressure plunger pump made of rust-
and acidproof materials. The plungers are made of non-wearing ceramic material. Suitable for
temperatures up to 60° C.
Safety valve:
Built-in adjustable by-pass – continuous variable regulation of water volume.
Pressure regulation:
Working pressure adjustable from 30 bar to max. pressure at the lance. The low-pressure injector
with dosage regulation for detergents is also controlled from the lance.
Mics:
Epoxy-treated steel frame and cover. 10" wheel, 8 m high-pressure hose, spraygun, double-lance
incl. nozzles.
Optional:
- Auto start/stop.
- Detergent container.
Product range:
models are manufactured with each suitable for a pressure between 150 and 500bar. Can also be
delivered as stationary model. And a water flow with between 14 and 42L per minute.
How To Use:
Choke handle | Speed handle | Ignition
High-pressure cleaners.
Instruction manual
Use the Choke handle before start if the
machine is cold.
(The choke handle needs to be drawn to the
left, as showed in the picture).
(The Speed handle underneath the choke
handle wont work, as the engine will control the
speed as a result of the Speedmatic installed).
When the choke handle is in position, turn the
ignition right and the engine will start.
When the engine has started, move the choke
handle slowly to the right and the device is now
ready for use.
Batch – CWP 2042 - 5015
Page: 4 of 28