Advertisement
Quick Links
Date:
18/4-2017
© Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc
KENT HØJTRYK A/S
High-pressure cleaners
SKOVBRYNET 10
Instruction manual
DK-6752 GLEJBJERG
TLF. +45 75 19 80 33 E-mail:
High pressure cleaner
150 – 240bar
Warning: Read this manual before operating the product
Table of contents:
FrontPage
Overensstemmelseserklæring på Højtryksrenser - DK
Declaration of Conformity for High pressure cleaner - EN
1.
Machine description
1.1 Application
1.2 Functionality
2.
User guide
2.1 Preparation
2.2 Startup
2.3 Safety rule
3. Maintenance instructions
3.1 General maintenance
3.2 Troubleshooting
3.3 Spare parts
4. Installation and assembly
4.1 Unpacking
4.2 Removal
4.3 Technical specifications
4.4 Electrical diagram
5. Notes
Batch 3000 + 9000 Mobile og Stationary
info@kent-as.dk
Batch 3008 - 3016
Batch 9015 – 9025S
Rev. F1-Aug. 2019
Page:
1 of 36
www.kent-as.dk
Side
1
Side
2
Side
3
Side
4
Side
4
Side
5
Side
6
Side
6
Side
7
Side
12
Side
14
Side
14
Side
16
Side
17
Side
29
Side
29
Side
29
Side
30
Side
32
Side
34
Advertisement
Related Manuals for KENT 3008
Summary of Contents for KENT 3008
- Page 1 DK-6752 GLEJBJERG © Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc TLF. +45 75 19 80 33 E-mail: info@kent-as.dk www.kent-as.dk High pressure cleaner Batch 3008 - 3016 Batch 9015 – 9025S 150 – 240bar Warning: Read this manual before operating the product Table of contents: FrontPage Side Overensstemmelseserklæring på...
- Page 2 High-pressure cleaners Batch 3000 + 9000 Mobile og Stationary Date: 18/4-2017 Instruction manual Page: 2 of 36 © Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc EU-OVERENSSTEMMELSESERKLÆRING KENT HØJTRYK A/S Fabrikant: Skovbrynet 10 DK - 6752 Glejbjerg +45 75 19 80 33 Tlf: Erklærer hermed, at Maskine: Højtryksrensere...
- Page 3 High-pressure cleaners Batch 3000 + 9000 Mobile og Stationary Date: 18/4-2017 Instruction manual Page: 3 of 36 © Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc EC-DECLARATION OF CONFORMITY FOR MACHINERY KENT HØJTRYK A/S Manufacturer: Skovbrynet 10 DK - 6752 Glejbjerg +45 75 26 73 00...
- Page 4 1. Machine description 1.1 Application: Congratulations with your choice of a Kent high-pressure cleaner. You have purchased a unit with high technological value. It is a professional and reliable machine which you can use for many years. Thus, we ask you to read and follow the instruction manual carefully.
- Page 5 Date: 18/4-2017 Instruction manual Page: 5 of 36 © Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc 1.2 Functionality: Section of 3 cyl. pump piston cycle. Pump: 3-cylinder, vibrationless and noiseless, oil bath lubricated high-pressure plunger pump made of rust- and acidproof materials. The plungers are made of non-wearing ceramic material. Suitable for temperatures up to 60°...
- Page 6 18/4-2017 Instruction manual Page: 6 of 36 © Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc 2. User guide 2.1 Preparation The high-pressure cleaner must be moved by use of either a forklift truck, by rigging it directly onto a pallet with the high-pressure cleaner securely fixed or lifting by crane with the shown lifting bracket No.
- Page 7 18/4-2017 Instruction manual Page: 7 of 36 © Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc 2.2 Start up This machine must only be operated by persons over 18 years. (Danish At-instruction (At = Danish Working Environment Authority) D. 2.20 November 2006): Young persons covered by compulsory education must not operate pressure equipment.
- Page 8 Date: 18/4-2017 Instruction manual Page: 8 of 36 © Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc Start-up of machine: 1. Now you can turn on the water. 2. Hold the gun in open position for venting. 3. Switch the machine on. 4. The pressure can be adjusted on the double nozzle pipe.
- Page 9 Page: 9 of 36 © Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc The employer must make sure that the employees wear hearing protection as soon as they start work which is considered to be damaging to hearing. This means that noise exposure even below 85 dB(A) may require the use of hearing protection.
- Page 10 Instruction manual Page: 10 of 36 © Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc Precautions for storage/frost: We recommend filling the pump with anti-freeze equal to anti-freeze for cars if the machine will be stored in a place with a risk of being exposed to frost, or will not be used for more than 3 months. In case of low temperatures some parts may freeze or settle if the machine has been stored for a long time.
- Page 11 Instruction manual Page: 11 of 36 © Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc Important: When application of chemicals/soap has been terminated the suction hose and injector non-return valve MUST be cleaned with pure water. Place injector suction hose in a bucket or similar container with pure water and allow injector to suck water for a few minutes.
- Page 12 Instruction manual Page: 12 of 36 © Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc 2.3 Safety rules 1. Always wear protective equipment as described in the work instructions. This applies in particular for the use of suitable working clothes, safety goggles, gloves, safety footwear, respiratory protection equipment and hearing protection.
- Page 13 18/4-2017 Instruction manual Page: 13 of 36 © Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc 7. Never point the water jet towards yourself, other persons or animals. Cleaning of clothes on persons. 8. Avoid splashes on electrical wires and installations. 9. Be careful with sensitive and expensive installations.
- Page 14 18/4-2017 Instruction manual Page: 14 of 36 © Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc 3. Maintenance instructions 3.1 General maintenance Any repair or adjustment must take place only when the main power has been locked and the high- pressure cleaner has been secured against accidental start-up. A removable power plug makes the technician even safer.
- Page 15 Instruction manual Page: 15 of 36 © Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc Decalcification: Carried out when needed and is important to prevent clogging of the tube coil in the boiler. Fill with water and acetic acid in the mixture proportion 1 portion of acetic acid and 10 portions of water, leave the mixture for a couple of hours followed by flushing of loose pieces of chalk and dirt.
- Page 16 High-pressure cleaners Batch 3000 + 9000 Mobile og Stationary Date: 18/4-2017 Instruction manual Page: 16 of 36 © Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc 3.2 Troubleshooting Fault finding on the high pressure cleaners Fault finding Cause Remedy Cleaner does not start Fuse defective. Replace fuse.
- Page 17 18/4-2017 Instruction manual Page: 17 of 36 © Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc 3.3 Spare parts Note model number and name-plate on the high-pressure cleaner so that we can deliver the ordered spare parts to your machine. Always use original spare parts. Example of identification label:...
- Page 18 High-pressure cleaners Batch 3000 + 9000 Mobile og Stationary Date: 18/4-2017 Instruction manual Page: 18 of 36 © Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc 9000 Pressure Switch...
- Page 19 High-pressure cleaners Batch 3000 + 9000 Mobile og Stationary Date: 18/4-2017 Instruction manual Page: 19 of 36 © Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc 9000 Flow Switch...
- Page 20 High-pressure cleaners Batch 3000 + 9000 Mobile og Stationary Date: 18/4-2017 Instruction manual Page: 20 of 36 © Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc 9000 w/o autostop...
- Page 21 High-pressure cleaners Batch 3000 + 9000 Mobile og Stationary Date: 18/4-2017 Instruction manual Page: 21 of 36 © Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc 3016 Pressure Switch...
- Page 22 High-pressure cleaners Batch 3000 + 9000 Mobile og Stationary Date: 18/4-2017 Instruction manual Page: 22 of 36 © Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc 3016 Flow Switch...
- Page 23 High-pressure cleaners Batch 3000 + 9000 Mobile og Stationary Date: 18/4-2017 Instruction manual Page: 23 of 36 © Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc 3016 w/o autostop...
- Page 24 High-pressure cleaners Batch 3000 + 9000 Mobile og Stationary Date: 18/4-2017 Instruction manual Page: 24 of 36 © Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc Stationary...
- Page 25 High-pressure cleaners Batch 3000 + 9000 Mobile og Stationary Date: 18/4-2017 Instruction manual Page: 25 of 36 © Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc 9015 9020 9020S...
- Page 26 High-pressure cleaners Batch 3000 + 9000 Mobile og Stationary Date: 18/4-2017 Instruction manual Page: 26 of 36 © Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc ioæioæioæ 9018 9018S...
- Page 27 High-pressure cleaners Batch 3000 + 9000 Mobile og Stationary Date: 18/4-2017 Instruction manual Page: 27 of 36 © Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc 9019 9019 9019S 9019s...
- Page 28 High-pressure cleaners Batch 3000 + 9000 Mobile og Stationary Date: 18/4-2017 Instruction manual Page: 28 of 36 © Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc 9025 9025S...
- Page 29 High-pressure cleaners Batch 3000 + 9000 Mobile og Stationary Date: 18/4-2017 Instruction manual Page: 29 of 36 © Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc 3008, 3010, 3010S, 3012, 3012S, 3014 3016...
- Page 30 4.2 Removal: Lifting by crane is carried out as shown with lifting bracket No. 196654. This can be purchased from KENT Højtryk A/S. NEVER LIFT BY WEAK STRUCTURAL PARTS. The lift must be carried out with unplugged power plug. Lifting by truck must only take place if the high-pressure cleaner is secured on a transportation pallet.
- Page 31 High-pressure cleaners Batch 3000 + 9000 Mobile og Stationary Date: 18/4-2017 Instruction manual Page: 31 of 36 © Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc 4.3 Technical specifications: High-pressure cleaners 3000 Series 6200 Series 9000 Series 9000-ST Series Working Water- Motor- Pump Length width Model...
- Page 32 High-pressure cleaners Batch 3000 + 9000 Mobile og Stationary Date: 18/4-2017 Instruction manual Page: 32 of 36 © Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc 4.4 Eldiagram.
- Page 33 High-pressure cleaners Batch 3000 + 9000 Mobile og Stationary Date: 18/4-2017 Instruction manual Page: 33 of 36 © Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc Fits all models in the user-manual...
- Page 34 High-pressure cleaners Batch 3000 + 9000 Mobile og Stationary Date: 18/4-2017 Instruction manual Page: 34 of 36 © Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc 5 Notater:...
- Page 35 High-pressure cleaners Batch 3000 + 9000 Mobile og Stationary Date: 18/4-2017 Instruction manual Page: 35 of 36 © Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc KENT HØJTRYK A/S SKOVBRYNET 10 DK-6752 GLEJBJERG TLF. +45 75 19 80 33 www.kent-as.dk E-mail: info@kent-as.dk...
- Page 36 Instruction manual Page: 36 of 36 © Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc We also produce: Hot water cleaners up to 30 l / min and 500 bars with gasoline / diesel / electric motor, oil heated. Hotbox with and without pump for 12 V / 24 V DC and 110 V / 220 V AC in DIN2391 (General Steel) and 304L / 316L Spiral.