KENT Batch 9215 Instruction Manual

KENT Batch 9215 Instruction Manual

150 - 300 bar

Advertisement

Date:
18/4-2017
 Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc
High-pressure cleaners.
Instruction manual
TLF. +45 75 19 80 33 E-mail:
High pressure cleaner Batch 9215 - 9230
150 - 300 bar
Warning: Read this manual before operating the product

Table of contents:

FrontPage
Overensstemmelseserklæring på Højtryksrenser - Serie 9000 DK
Declaration of Conformity for High pressure cleaner - Model 9000 EN Page
1.
2.
4.2 Removal
Batch - 92/9300 - ST 1500
Page:
info@kent-as.dk
Batch 9315 - 9350
Batch ST1521 - ST1542
Rev. c March. 2018
1 of 36
www.kent-as.dk
Page
1
Page
2
3
Page
4
Page
4
Page
5
Page
6
Page
6
Page
7
Page 12
Page 14
Page 14
Page 16
Page 17
Page 27
Page 27
Page 27
Page 28
Page 29
Page 31

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Batch 9215 and is the answer not in the manual?

Questions and answers

Summary of Contents for KENT Batch 9215

  • Page 1: Table Of Contents

    DK-6752 GLEJBJERG  Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc TLF. +45 75 19 80 33 E-mail: info@kent-as.dk www.kent-as.dk High pressure cleaner Batch 9215 – 9230 Batch 9315 – 9350 Batch ST1521 – ST1542 150 – 300 bar Warning: Read this manual before operating the product...
  • Page 2: Kent Højtryk A/Sskovbrynet

    High-pressure cleaners. Batch - 92/9300 - ST 1500 Date: 18/4-2017 Instruction manual Page: 2 of 36  Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc EU-OVERENSSTEMMELSESERKLÆRING KENT HØJTRYK A/S Fabrikant: Skovbrynet 10 DK - 6752 Glejbjerg +45 75 19 80 33 Tlf: Erklærer hermed, at Maskine: Højtryksrenser...
  • Page 3 High-pressure cleaners. Batch - 92/9300 - ST 1500 Date: 18/4-2017 Instruction manual Page: 3 of 36  Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc EC-DECLARATION OF CONFORMITY FOR MACHINERY KENT HØJTRYK A/S Manufacturer: Skovbrynet 10 DK - 6752 Glejbjerg +45 75 26 73 00 Tel:...
  • Page 4: Machine Description

    1. Machine description 1.1 Application: Congratulations with your choice of a Kent high-pressure cleaner. You have purchased a unit with high technological value. It is a professional and reliable machine which you can use for many years. Thus, we ask you to read and follow the instruction manual carefully.
  • Page 5: Functionality

    Date: 18/4-2017 Instruction manual Page: 5 of 36  Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc 1.2 Functionality: Section of 3 cyl. pump piston cycle. Pump: 3-cylinder, vibrationless and noiseless, oil bath lubricated high-pressure plunger pump made of rust- and acidproof materials. The plungers are made of non-wearing ceramic material. Suitable for temperatures up to 60°...
  • Page 6: User Guide

    18/4-2017 Instruction manual Page: 6 of 36  Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc 2. User guide 2.1 Preparation The high-pressure cleaner must be moved by use of either a forklift truck, by rigging it directly onto a pallet with the high-pressure cleaner securely fixed, or lifting by crane with the shown lifting bracket No.
  • Page 7: Batch - 92/9300 - St 1500

    18/4-2017 Instruction manual Page: 7 of 36  Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc 2.2 User guide This machine must only be operated by persons over 18 years. (Danish At-instruction (At = Danish Working Environment Authority) D. 2.20 November 2006): Young persons covered by compulsory education must not operate pressure equipment.
  • Page 8: Start Up

    Date: 18/4-2017 Instruction manual Page: 8 of 36  Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc Start-up of machine: 1. Now you can turn on the water. 2. Hold the gun in open position for venting. 3. Switch the machine on. 4. The pressure can be adjusted on the double nozzle pipe.
  • Page 9: Batch - 92/9300 - St 1500

    Page: 9 of 36  Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc The employer must make sure that the employees wear hearing protection as soon as they start work which is considered to be damaging to hearing. This means that noise exposure even below 85 dB(A) may require the use of hearing protection.
  • Page 10: Batch - 92/9300 - St 1500

    Instruction manual Page: 10 of 36  Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc Precautions for storage/frost: We recommend to fill the pump with anti-freeze equal to anti-freeze for cars if the machine will be stored in a place with a risk of being exposed to frost, or will not be used for more than 3 months. In case of low temperatures some parts may freeze or settle if the machine has been stored for a long time.
  • Page 11: Batch - 92/9300 - St 1500

    Instruction manual Page: 11 of 36  Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc Important: When application of chemicals/soap has been terminated the suction hose and injector non-return valve MUST be cleaned with pure water. Place injector suction hose in a bucket or similar container with pure water and allow injector to suck water for a few minutes.
  • Page 12: Safety Rules

    Instruction manual Page: 12 of 36  Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc 2.3 Safety rules 1. Always wear protective equipment as described in the work instructions. This applies in particular for the use of suitable working clothes, safety goggles, gloves, safety footwear, respiratory protection equipment and hearing protection.
  • Page 13: Batch - 92/9300 - St 1500

    18/4-2017 Instruction manual Page: 13 of 36  Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc 7. Never point the water jet towards yourself, other persons or animals. Cleaning of clothes on persons. 8. Avoid splashes on electrical wires and installations. 9. Be careful with sensitive and expensive installations.
  • Page 14: Maintenance Instructions

    18/4-2017 Instruction manual Page: 14 of 36  Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc 3. Maintenance instructions 3.1 General maintenance Any repair or adjustment must take place only when the main power has been locked and the high- pressure cleaner has been secured against accidental start-up. A removable power plug makes the technician even safer.
  • Page 15: Batch - 92/9300 - St 1500

    Instruction manual Page: 15 of 36  Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc Decalcification: Carried out when needed and is important to prevent clogging of the tube coil in the boiler. Fill with water and acetic acid in the mixture proportion 1 portion of acetic acid and 10 portions of water, leave the mixture for a couple of hours followed by flushing of loose pieces of chalk and dirt.
  • Page 16: Fault Finding

    High-pressure cleaners. Batch - 92/9300 - ST 1500 Date: 18/4-2017 Instruction manual Page: 16 of 36  Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc 3.2 Fault finding Fault finding on the high pressure cleaners Fault finding Cause Remedy Cleaner does not start Fuse defective. Replace fuse.
  • Page 17: Spare Parts

    18/4-2017 Instruction manual Page: 17 of 36  Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc 3.3 Spare parts Note model number and name-plate on the high-pressure cleaner so that we can deliver the ordered spare parts to your machine. Always use original spare parts. Example of identification label:...
  • Page 18: Batch - 92/9300 - St 1500

    High-pressure cleaners. Batch - 92/9300 - ST 1500 Date: 18/4-2017 Instruction manual Page: 18 of 36  Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc Spare parts drawing for: Batch 92/9300...
  • Page 19: Batch - 92/9300 - St 1500

    High-pressure cleaners. Batch - 92/9300 - ST 1500 Date: 18/4-2017 Instruction manual Page: 19 of 36  Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc Spare parts drawing for: ST 1521, ST 1525, ST 1530...
  • Page 20: Batch - 92/9300 - St 1500

    High-pressure cleaners. Batch - 92/9300 - ST 1500 Date: 18/4-2017 Instruction manual Page: 20 of 36  Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc Unloader ST 261 Pos nr. Emne Part 159500 ST. 261 Komplet ST. 261 complete 159501 ST. 261 m/ injektor 2,4 ST. 261 W/ injector 2,4 159511 Møtrik...
  • Page 21: Batch - 92/9300 - St 1500

    High-pressure cleaners. Batch - 92/9300 - ST 1500 Date: 18/4-2017 Instruction manual Page: 21 of 36  Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc Unloader ST 280...
  • Page 22: Batch - 92/9300 - St 1500

    High-pressure cleaners. Batch - 92/9300 - ST 1500 Date: 18/4-2017 Instruction manual Page: 22 of 36  Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc Unloader VB85...
  • Page 23: Batch - 92/9300 - St 1500

    High-pressure cleaners. Batch - 92/9300 - ST 1500 Date: 18/4-2017 Instruction manual Page: 23 of 36  Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc 9315 - 9315...
  • Page 24: Batch - 92/9300 - St 1500

    High-pressure cleaners. Batch - 92/9300 - ST 1500 Date: 18/4-2017 Instruction manual Page: 24 of 36  Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc 9215 - 9221 ST 1521...
  • Page 25: Batch - 92/9300 - St 1500

    High-pressure cleaners. Batch - 92/9300 - ST 1500 Date: 18/4-2017 Instruction manual Page: 25 of 36  Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc 9225 ST 1525...
  • Page 26 High-pressure cleaners. Batch - 92/9300 - ST 1500 Date: 18/4-2017 Instruction manual Page: 26 of 36  Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc 9230 - ST 1519...
  • Page 27: Batch - 92/9300 - St 1500

    High-pressure cleaners. Batch - 92/9300 - ST 1500 Date: 18/4-2017 Instruction manual Page: 27 of 36  Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc 9330 - 9336 - 9342...
  • Page 28: Batch - 92/9300 - St 1500

    High-pressure cleaners. Batch - 92/9300 - ST 1500 Date: 18/4-2017 Instruction manual Page: 28 of 36  Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc 9350...
  • Page 29: Installation And Assembly

    4.2 Flytning: Lifting by crane is carried out as shown with lifting bracket No. 196654. This can be purchased from Kent Højtryksrensere. NEVER LIFT BY WEAK STRUCTURAL PARTS. The lift must be carried out with unplugged power plug. Lifting by truck must only take place if the high-pressure cleaner is secured on a transportation pallet.
  • Page 30: Technical Specifications

    High-pressure cleaners. Batch - 92/9300 - ST 1500 Date: 18/4-2017 Instruction manual Page: 30 of 36  Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc 4.3 Technical specifications: High-pressure cleaners Batch 9200 Batch 9300 Model ST 1500 Working Water- Motor- Electr. Plunger Length Width Height Weight...
  • Page 31: Eldiagram

    High-pressure cleaners. Batch - 92/9300 - ST 1500 Date: 18/4-2017 Instruction manual Page: 31 of 36  Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc 4.4 Eldiagram.
  • Page 32: Batch - 92/9300 - St 1500

    High-pressure cleaners. Batch - 92/9300 - ST 1500 Date: 18/4-2017 Instruction manual Page: 32 of 36  Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc...
  • Page 33: Note

    High-pressure cleaners. Batch - 92/9300 - ST 1500 Date: 18/4-2017 Instruction manual Page: 33 of 36  Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc 5 Notes:...
  • Page 34: Batch - 92/9300 - St 1500

    High-pressure cleaners. Batch - 92/9300 - ST 1500 Date: 18/4-2017 Instruction manual Page: 34 of 36  Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc...
  • Page 35: Batch - 92/9300 - St 1500

    High-pressure cleaners. Batch - 92/9300 - ST 1500 Date: 18/4-2017 Instruction manual Page: 35 of 36  Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc KENT HØJTRYK A/S SKOVBRYNET 10 DK-6752 GLEJBJERG TLF. +45 75 19 80 33 www.kent-as.dk E-mail: info@kent-as.dk...
  • Page 36: Batch - 92/9300 - St 1500

    Instruction manual Page: 36 of 36  Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc We also produce: Hot water cleaners up to 30 l / min and 500 bars with gasoline / diesel / electric motor, oil heated. And low-pressure Hot Box with max. flow 45 l/min.

Table of Contents