Installing The I/O Board; Removing The Coin-Cell Battery - Dell P51G Owner's Manual

Installing the I/O Board

1. Place the I/O board on the computer.
2. Tighten the screw to secure the I/O board to the computer.
3. Install:
a. base frame
b. keyboard
c. system fan
d. WLAN card
e. hard drive
f. battery
g. base cover
4. Follow the procedures in

Removing the Coin-Cell Battery

1. Follow the procedures in
2. Remove:
a. base cover
b. battery
c. hard drive
d. WLAN card
e. system fan
f. keyboard
g. base frame
3. Perform the following steps as shown in the illustration:
a. Disconnect the coin-cell cable from the computer [1].
b. Lift the coin-cell battery from the computer [2].
After Working Inside Your
Before Working Inside Your
computer.
Computer.
27