3.
Tighten the screw to secure the battery to the computer.
4.
Install the
base
cover.
5.
Follow the procedures in
Removing the Hard Drive
1.
Follow the procedures in
2.
Remove:
a.
base cover
b.
battery
3.
Perform the following steps as shown in the illustration:
a. Loosen the screw that secures the hard drive to the computer [1].
b. Lift the hard drive partially at a 45–degree angle [2].
c. Slide the hard drive from the computer [3].
4.
Perform the following steps as shown in the illustration:
a. Disconnect the hard drive cable [1].
b. Lift the hard drive from the computer [2].
12
After Working Inside Your
Before Working Inside Your
computer.
Computer..