Hitachi TA 003 Manual page 17

5.3 Initialization
This model has a Initialization Mode, where the technician can initial the EEPROM.
Preliminary
1.To access the Bebbug Mode, the LCD TV must be
running.
Procedure
6. Press and hold the #4 and #5 button (VOLUME
7. While continuing to hold the #4 and #5 button, press and hold the #1 button (SUB-POWER).
8. After both buttons have been held down for five (5) seconds, first release the #1 button, then release the
#4 and #5 button.
9. As stated previously, the input that the LCD TV had selected at the time will determine which actual
INITIALIZATION display will show up. (See below)
①
and VOLUME ).
17