Factory Settings For Orbi Pro Satellite Model Srs60 - NETGEAR Orbi Pro SRR60 User Manual

Table 4. Factory default settings for the router (Continued)
Feature
Firewall Inbound (communications coming in from
the Internet)
Outbound (communications going out to
the Internet)
Source MAC filtering
WiFi WiFi communication
SSID name
Security
Broadcast SSID
Transmission speed
Country/region
RF channel
1
Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and
network overhead, lower actual data throughput rate.

Factory Settings for Orbi Pro Satellite Model SRS60

The following table shows the factory default settings for the Orbi Pro satellite.
Supplemental Information
Orbi Pro
Default Setting
Disabled (except traffic on port 80, the
HTTP port)
Enabled (all)
Disabled
Enabled
See router label
WPA2-PSK (AES)
Enabled
1
Auto
United States in the US; otherwise, varies
by region
2.4 GHz front and back haul: Auto
5 GHz front haul:
• Channel 48 for NA, AU, and CA
• Channel 36 for EU
5 GHz back haul:
• Channel 48 for NA, AU, and CA
• Channel 36 for EU
139 User Manual