Wall Mount Or Ceiling Mount Orbi Pro; Wall-Mount Your Orbi Pro - NETGEAR Orbi Pro SRR60 User Manual

Table 2. Orbi Pro add-on satellite (model SRS60) LED description
LED LED Behavior
Power LED The Power LED is located above the Power On/Off button on the rear panel.
• Solid green. Power is on.
• Solid amber. The satellite is rebooting.
• Blinking amber. The satellite is resetting to factory default settings.
• Blinking red. The firmware is corrupted.
• Off. Power is not supplied.
Add-on satellite Optional add-on satellites are sold separately and can be added to your Orbi network. The
ring LED ring LED is located on the top.
• Pulsing white. The satellite is booting.
• Solid white. The satellite is ready to sync to the router (press the Sync button).
• Blue for three minutes. The connection between the satellite and the router is good.
• Amber for three minutes. The connection between the satellite and the router is fair.
• Magenta. The satellite is not connected to the router or is not getting an IP address.
• Off. The satellite synced to the router and is working normally.

Wall Mount or Ceiling Mount Orbi Pro

Your package contains wall-mounting and ceiling-mounting items. Before you can wall
mount or ceiling mount your Orbi Pro router (model SRR60) or Orbi Pro satellite (model
SRS60), you must attach the mount base and cover to your router or satellite.

Wall-Mount Your Orbi Pro

After you attach the mount base and cover to your router or satellite, you can mount
your router or satellite to the wall.
Overview
Orbi Pro
12 User Manual