2
Press [MENU/SET].
3
Press 2/1 to select the items (year, month,
day, hour, minute or display sequence), and
press 3/4 to set.
A: Time at the home area
B: Time at the travel destination (P58)
‚: Cancel without setting the clock.
4
Press [MENU/SET] to set.
•
After completing the clock settings, turn the camera off.
Then turn the camera back on, switch to recording mode, and check that the display
reflects the settings that were performed.
•
When [MENU/SET] has been pressed to complete the settings without the clock having
been set, set the clock correctly by following the
picture mode)
Changing the clock setting (In normal picture mode)
1
Press [MENU/SET].
2
Press 3/4 to select [CLOCK SET].
3
Press 1 and then perform steps
4
Press [MENU/SET] to close the menu.
•
You can also set the clock in the [SETUP] menu. (P21)
Note
•
The clock is displayed when [DISPLAY] is pressed several times during recording.
•
When a fully charged battery has been inserted for more than 24 hours, charging of the built-in
battery for the clock is completed so the clock setting will be stored (in the camera) for at least
3 months even if the battery is removed. (If you insert a battery that is not sufficiently charged,
the length of time that the clock setting is stored may become less.)
•
You can set the year from 2000 to 2099. The 24-hour system is used.
•
If the clock is not set, the correct date cannot be printed when you stamp the date on the
pictures with [TEXT STAMP] (P74) or order a photo studio to print the pictures.
•
If the clock is set, the correct date can be printed even if the date is not displayed on the screen
of the camera.
"
procedure below.
"
Changing the clock setting (In normal
3
4
and
to set the clock.
Preparation
MENU
/SET
:
:
VQT1M97
17