Led Display; Eco/Gear Function - Beko RG10A/BGEF User Manual

8 How to use advanced functions
8.3

LED DISPLAY

Press LED button
LED
Press this button to turn on and turn off the
display and air conditioner buzzer on the indoor
unit.
8.4

ECO/GEAR function

ECO operation:
Under cooling mode, press this button, the remote controller will adjust the temperature automatically to
24°C/75°F, fan speed of Auto to save energy (only when the set temperature is less than 24°C/75°F). If
the set temperature is above 24°C/75°F, press the ECO button, the fan speed will change to Auto, the set
temperature will remain unchanged.
Note:
C
Pressing the ECO/GEAR button, or modifying the mode or adjusting the set temperature
to less than 24 °C/75°F will stop ECO operation.
Under ECO operation, the set temperature should be 24°C/75°F or above, it may result in
insufficient cooling. If you feel uncomfortable, just press the ECO button again to stop it.
22 / 80 EN
Press this button to enter the energy efficient mode in a sequence of following:
ECO  GEAR (75%)  GEAR (50%)  Previous setting mode  ECO......
C
Note: This function is only available under COOL mode.
5s
Press this button
LED
more than 5 seconds
(some units)
Keep pressing this button more than 5 seconds,
the indoor unit will display the actual room
temperature. Press more than 5 seconds again
will revert back to display the setting temperature.
Remote control / User Manual