Beko RG10A/BGEF User Manual page 11

4 Buttons and functions
1. Mode
Scrolls through operation modes as follows:
AUTO  COOL  DRY  HEAT  FAN
C
Note: HEAT mode is not
supported by the cooling only
appliance.
2. ECO/GEAR
Press this button to enter the energy efficient
mode in a sequence of following:
ECO  GEAR (75%)  GEAR (50%) 
Previous setting mode  ECO ....
3. OK
Used to confirm the selected functions
4. Timer
Set timer to turn unit on or off.
5. BREEZE AWAY
This feature avoids direct air flow blowing on
the body and makes you feel indulging in silky
coolness.
C
Note: This feature is available
under cool, Fan and Dry mode
only.
6. GoClean
Used to start/stop the GoClean function.
(Some units, please refer to the User' s
operation & Installation manual).
7. LED
Turns indoor unit's LED display and air
conditioner buzzer on and off, which create
a comfortable and quiet environment.
8. Turbo
Enables unit to reach preset temperature in
shortest possible time
Remote control / User Manual
9. Swing
Starts and stops the horizontal louver
movement. Hold down for 2 seconds to
initiate vertical louver auto swing feature.
10. FAN SPEED
Selects fan speeds in the following order:
AU  20%  40%  60% 80% 100%.
Press the TEMP
decrease the fan speed in 1% increments.
11. TEMP
Decreases temperature in 1°C (1°F)
increments. Min. temperature is 16°C (60°F).
12. SET
Scrolls through operation functions as follows:
Sleep ( ) 
ZoneFollow ( ) 
AP mode ( ) (Some units)  Sleep...
The selected symbol will flash on the display
area, press the OK button to confirm.
13. TEMP
Increases temperate in 1°C (1°F) increments.
Max. temperature is 30°C (86°F).
Note: Press together
C
buttons at the same time for
3 seconds will alternate the
temperature display between
the °C & °F.
14. On/Off
Turns the unit on or off.
or button to increase/
&
11 / 80 EN