Prepare For Installation - Philips WACS700 Connecting Manual

Preparation

Prepare for installation

On WACS700:
1
Check you have finished the Wi-Fi connection
between WAC700 Center and WAS700
Station (See Quick Start Guide, Step A)
2
Check your WAC700 Center is switched on
On your PC or existing PC network:
1
Switch on the PC with administrator's privileges
2
Close all the software programs running on your
PC
3
Insert the installer CD into your PC and select your
desired language
4
Press Accept if you accept the terms on the
license
5
On the Welcome page, press Next to enter the
Software Installation page
Select Express Installation
or Custom Installation
– For the first-time setup, select Express
Installation. Both the PC connection
and DMM will be installed.
– To change your installation option or
re-install DMM, select Custom Installation.