Table of Contents
Advertisement
Network Stack Driver Support [Disabled]
[Disabled]
[Enabled]
Next Boot after AC Power Loss [Normal Boot]
[Normal Boot]
[Fast Boot]
2.7.2
Boot Logo Display [Enabled]
Boot Logo Display [Auto]
[Auto]
[Full Screen]
[Disabled]
POST Delay Time [3 sec]
This item appears only when you set Boot Logo Display to [Enabled]. This item allows you to
select the desired additional POST waiting time to easily enter the BIOS setup. You can only
execute the POST delay time during Normal Boot. The values range from 0 to 10 seconds.
This feature will only work under normal boot.
Post Report [5 sec]
This item appears only when you set Boot Logo Display to [Disabled]. This item allows you to
select a desired post report waiting time. The values range from 1 to 10 seconds.
2.7.3
Bootup NumLock State [On]
[On]
[Off]
2.7.4
Wait for 'F1' If Error [Enabled]
When this item is set to [Enabled], the system waits for the F1 key to be pressed when error
occurs. Configuration options: [Disabled] [Enabled]
2.7.5
Setup Mode [EZ Mode]
[Advanced Mode]
[EZ Mode]
2-22
Select to skip the network stack driver from loading during POST.
Select to load the network stack driver during POST.
Returns to normal boot on the next boot after AC power loss.
Accelerates the boot speed on the next boot after AC power loss.
Adjust automatically for Windows
Maximize the boot logo size.
Hide the logo during POST.
Sets the power‑on state of the NumLock to [On].
Sets the power‑on state of the NumLock to [Off].
Sets Advanced Mode as the default screen for entering the BIOS
setup program.
Sets EZ Mode as the default screen for entering the BIOS setup
program.
requirement.
®
Chapter 2: BIOS information
Advertisement
Table of Contents
