M.2 Solid-State Drive - Lenovo 13w Yoga Gen 2 User Manual

For access, do the following:
1. Disable the built-in battery. See "Disable Fast Startup and the built-in battery" on page 25.
2. Turn off the computer and disconnect the computer from ac power and all connected cables.
3. Close the computer display and turn the computer over.
4. Remove the base cover assembly. See "Base cover assembly" on page 26.
Removal procedure
Note: A Mylar film might cover the memory module. To access the memory module, peel off the film first.
Installation procedure

M.2 solid-state drive

Prerequisite
Before you start, read
Generic Safety and Compliance Notices
28
Lenovo 13w Yoga Gen 2 User Guide
and print the following instructions.