Table of Contents
Advertisement
UK only
THE ADDITIONAL COMMENT OF ELECTRICAL CONNECTION
The tool is double insulated for safety, no earth connection is required.
CAUTION:
The tool must be connected to a plug having a rated current greater than that of tool.
The rated voltage and current appear on the name plate.
IMPORTANT: The wires in the mains lead are coloured in accordance with the following code.
NOTE:
As the colours of the mains lead of the tool may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
THE WIRE WHICH IS COLOURED BLUE MUST BE CONNECTED TO THE TERMINAL
WHICH IS MARKED WITH THE LETTER ``N' ' OR COLOURED BLACK. THE WIRE WHICH IS
COLOURED BROWN MUST BE CONNECTED TO THE TERMINAL WHICH IS MARKED WITH
THE LETTER ``L'' OR COLOURED RED.
CAUTION:
Neither wire is to be connected to earth terminal which is marked with the letter ``E' ' or symbol
``
''.
FOR 110 VOLT TOOL, USE PLUGS TO BS4343.
DOUBLE INSULATION
Made in Japan
883877A6
Advertisement
Table of Contents
