– Wear ear protection. – (Serial No. : series production) The typical weighted root mean square acceleration manufactured by Makita Corporation in Japan is in value is not more than 2.5 m/s compliance with the following standards or standard- ized documents,...
Page 4
Symbols The following show the symbols used for the tool. Be sure that you understand their meaning before use. [ Read instruction manual. [ DOUBLE INSULATION [ Wear safety glasses.
ADDITIONAL SAFETY RULES 24. Do not use water or grinding lubricant. ENB031-3 1. Always wear safety goggles and ear protec- SAVE THESE INSTRUCTIONS. tors during operation. 2. Always be sure that the tool is switched off OPERATING INSTRUCTIONS and unplugged before carrying out any work on the tool.
ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
UK only DOUBLE INSULATION THE ADDITIONAL COMMENT OF ELECTRICAL CONNECTION The tool is double insulated for safety, no earth connection is required. CAUTION: The tool must be connected to a plug having a rated current greater than that of tool. The rated voltage and current appear on the name plate.