Assembling And Running The Food Chopper - KitchenAid 9KFC0516 Manual

USING THE FOOD CHOPPER

ASSEMBLING AND RUNNING THE FOOD CHOPPER

IMPORTANT: Be sure the Food Chopper is unplugged before assembling�
1
2
3
NOTE: Do not try to install more than one accessory at a time� The Food Chopper will
operate with either the blade or the whisking accessory in place, not both�
4
IMPORTANT: Do not process coffee beans or hard spices such as nutmeg as they may
damage the Food Chopper�
5
NOTE: The work bowl and lid must be locked into place for the Food Chopper to
operate�
W11261145B.indd 9
Start with the work bowl handle facing front on
the base� Rotate the handle 90° counterclockwise
to lock into place� When assembled properly, the
handle will face the right side�
Fit drive adapter over the shaft in the center of the
work bowl, then rotate and lower the drive adapter
until it rests at the bottom of the work bowl�
If using the blade, fit the blade over the drive
adapter, then rotate and lower the blade until
it rests at the bottom of the work bowl� If using
the whisking accessory, see "Using the whisking
accessory" section�
Place ingredients to be processed inside the work
bowl� For uniform consistency of processed foods,
cut fruits, vegetables, and meats into 1-inch pieces�
Place the lid on the work bowl with the lid handle
facing front� Rotate the lid handle counterclockwise
until it locks into place� The lid will click when
properly locked into place�
USING THE FOOD CHOPPER | 9
12/10/2018 1:03:35 PM