Specifications - MTX RT500.1D Manual

Introduction
Thank you for purchasing an MTX Audio Hi-Performance amplifier. Proper installation matched with MTX speak-
ers and subwoofers provide superior sound and performance for endless hours of waking the neighbors, slam-
min' your friends or flat out stomping wanna-be players. Congrats and enjoy the ultimate audio experience with
MTX !

Specifications

• 1-Channel Mono Block Class-D Power Amplifier
• CEA2006 certified Power Output :
- 500 watts RMS x 1-channel at 2Ω and THD+N ≤1%
- 300 watts RMS x 1-channel at 4Ω and THD+N ≤1%
• Crossover :
- Low pass 12dB/oct variable from 40Hz to 180Hz
- Subsonic filter 12dB/oct variable from 0 to 50Hz
• Signal-to-Noise Ratio (1 watt) : > 80dB
• THD+Noise (Distortion) (1 watt) : ≤ 1%
• Frequency Response (±1dB) : 10Hz-180Hz
• Maximum Input Signal : 6V
• Maximum Sensitivity : 100mV
• Dimensions : 324mm x 180mm x 55mm
• EBC (External Bass Control) remote included
Control Panel
EBC Port
GND
www.mtxaudio.com - www.mtxaudio.eu
INPUT OUTPUT
R
R
L L
POWER
REM +12V
LP SUB
GAIN X-OVER SONIC
6V 0,1V 40Hz 180Hz OFF 50Hz
SPEAKER
FUSE + -