Table of Contents
Advertisement
16 Shelf supports
To clean the rails and the cooking compartment, or to
replace the rails, you can remove these.
16.1 Detaching the shelf supports
WARNING ‒ Risk of burns!
The shelf supports get very hot
Never touch the shelf supports when hot.
▶
Always allow the appliance to cool down.
▶
Keep children at a safe distance.
▶
Lift the rail forwards slightly
1.
Pull the whole rail to the front
2.
Clean the rail.
3.
→ "Cleaning products", Page 15
16.2 Attaching the shelf supports
Notes
¡ The rails only fit on the right or left.
¡ For both pull-out rails, ensure that you can pull them
forwards and out.
First, push the rail into the middle of the rear
1.
socket
until the rail rests against the cooking
compartment wall, and then push this back
2.
Push the rail into the front socket
also rests against the cooking compartment wall,
and then press this downwards
16.3 Removing the pull-out rail
WARNING ‒ Risk of burns!
The shelf supports get very hot
Never touch the shelf supports when hot.
▶
Always allow the appliance to cool down.
▶
Keep children at a safe distance.
▶
and detach it
.
and remove it.
.
until the rail
.
3
4
ATTENTION!
The self-cleaning surfaces in the cooking compartment
may be damaged by detaching and attaching the pull-
out rails.
Detach the rails before detaching or attaching the
▶
pull-out rails.
Note: If necessary, you can use pull-out rails on all
levels.
Push on the tab marked PUSH behind the rail, and
1.
push the rail to the rear.
Keep the PUSH tab pushed back
2.
rail outwards
.
Pull the rail out towards the front until the retainer at
3.
the back unhooks.
Shelf supports en
and swing the
19
Advertisement
Table of Contents
