Siemens HB457G0 0 Series User Manual And Installation Instructions page 17

Table of Contents

Advertisement

For some surfaces, you can use alternative
cleaning agents.
→ "Suitable cleaning agents", Page 15
Dry with a soft cloth.
2.
13.3 Cleaning self-cleaning surfaces in the
cooking compartment
The back wall, ceiling and side walls of the cooking
compartment are self-cleaning and have a rough sur-
face.
ATTENTION!
If you do not clean the self-cleaning surfaces regularly,
they may become damaged.
If dark stains are visible on the self-cleaning sur-
faces, use the cleaning function to clean the cook-
ing compartment.
14  Cleaning function
Use the cleaning function regularly to help retain the
cleaning ability of the self-cleaning surfaces and pre-
vent damage.
The self-cleaning surfaces in the cooking compartment
are coated with a porous, matt ceramic layer and have
a rough surface. When the appliance is in operation,
the self-cleaning surfaces absorb splashes from roast-
ing or grilling and break them down.
The following surfaces are self-cleaning:
¡ Back wall
¡ Ceiling
¡ Side walls
ATTENTION!
If you do not clean the self-cleaning surfaces regularly,
they may become damaged.
If dark stains are visible on the self-cleaning sur-
faces, use the cleaning function to clean the cook-
ing compartment.
If a prompt to clean appears in the display, use the
cleaning function to clean the cooking compart-
ment.
Do not use oven cleaner or abrasive cleaning aids.
If oven cleaner accidentally comes into contact with
the self-cleaning surfaces, dab it off immediately us-
ing water and a sponge cloth. Do not rub.
14.1 Cleaning recommendation
The appliance detects the type and duration of the ap-
pliance operation and, if necessary, recommends using
the cleaning function.
If
lights up in the display when the appliance is
switched off, use the cleaning function as soon as
possible.
To remove the information from the display,
press any button except for the
ever, the information will continue to be dis-
played until the cleaning function has been run in
full.
To reset the cleaning recommendation, press
and hold the
 button for approx. four seconds.
The information does not reappear until the appli-
ance has been used again a certain number of
times.
Notes
¡ If the appliance is already dirty, e.g. because you
¡ After a power failure, the cleaning recommendation
14.2 Preparing the appliance for the
cleaning function
In order to achieve a good cleaning result, prepare the
appliance carefully.
ATTENTION!
Using oven cleaner on the self-cleaning surfaces dam-
ages the surfaces.
1.
2.
3.
 button. How-
4.
If a prompt to clean appears in the display, use the
cleaning function to clean the cooking compart-
ment.
Do not use oven cleaner or abrasive cleaning aids.
If oven cleaner accidentally comes into contact with
the self-cleaning surfaces, dab it off immediately us-
ing water and a sponge cloth. Do not rub.
Use the cleaning function.
→ "Cleaning function ", Page 17
have used it to cook fatty poultry or roasts, or if you
notice dark patches on the self-cleaning surfaces,
do not wait until this information appears in the dis-
play to run the cleaning function. The more often
you use the cleaning function, the longer the self-
cleaning surfaces will retain their cleaning ability.
is reset. It is therefore a good idea to run the clean-
ing function after a power failure has occurred.
Do not use oven cleaner on the self-cleaning sur-
faces. If oven cleaner does get onto these surfaces,
dab it off immediately using water and a sponge
cloth. Do not rub the surface and do not use abras-
ive cleaning aids.
Remove accessories and cookware from the cook-
ing compartment.
Unhook the shelf supports and remove them from
the cooking compartment.
→ "Shelf supports", Page 19
Use a detergent solution and a soft cloth to remove
heavy soiling:
– From the cooking compartment floor
– From the inside of the appliance door
– From the glass cover for the oven light
This prevents stains that cannot be removed.
Remove any objects from the cooking compartment.
The cooking compartment must be empty.
Cleaning function  en
17

Advertisement

Table of Contents
loading

Table of Contents