Table of Contents
Advertisement
Positioning and connecting
en
Keep the screws and sleeves in
Note:
a safe place.
Take the hoses out of the holders.
1.
Unscrew and remove all four
2.
transportation securing bolts with a
wrench (WAF 13).
Remove the sleeves. Remove the
mains cable from the holders.
Insert the covers. Lock the covers
3.
firmly in place by applying pressure
to the snap-in hooks.
14
Hose and cable lengths
Connection on left side
or
Connection on right side
If the hose holders are used, the
Note:
possible hose lengths are reduced!
Available from dealer/customer
service:
Extension for Aqua-Stop or cold
■
water inlet hose (approx. 2.50 m).
Order no. WMZ 2380, WZ 10130,
CZ 11350, Z 7070X0.
Longer supply hose (approx.
■
2.20 m), for standard model.
Advertisement
Table of Contents
