Table of Contents
Advertisement
5
Opening the Monitor
At the time when this camera is purchased, the monitor is stowed in the camera body.
Bring out the monitor as shown below.
1 Open the monitor. (Maximum 180o)
2 It can be rotated 180o forward.
3 Return the monitor to its original position.
• When rotating the monitor, be careful not to apply too much force. Doing so may cause
damage.
• When not using the monitor it is recommended that you close it with the screen facing inward to
prevent dirt and scratches.
6
Setting Date/Time (Clock Set)
• The clock is not set when the camera is shipped.
1
Turn the camera on.
2
Press [MENU/SET].
3
Press 2/1 to select the items (year, month, day,
hour, minute), and press 3/4 to set.
4
Press [MENU/SET] to set.
5
When [The clock setting has been completed.] is
displayed, press [MENU/SET].
6
When [Please set the home area] is displayed, press
[MENU/SET].
7
Press 2/1 to select the home area, and then press
[MENU/SET].
Preparation/Basic "Quick Start Guide"
(ENG) DVQX1324
19
Advertisement
Table of Contents
