Controlling The Camera From A Pc - Panasonic LUMIX DC-G9M Basic Operating Instructions Manual

Others

Controlling the Camera from a PC

∫ Downloading software
"LUMIX Tether"
This software is used to control a Panasonic digital camera from a PC. It allows you to
change various settings of the camera, perform remote recording, and save remotely
recorded images to the PC.
Check the site below to download and install the software.
http://panasonic.jp/support/global/cs/soft/download/d_lumixtether.html
• Operating environment
OS
Interface
• Supported OSs are current as of November 2017 and are subject to change.
• For details on how to use the "LUMIX Tether", refer to the operation guide of "LUMIX Tether"
(PDF file).
∫ Operating the camera from a PC
Preparations:
Install "LUMIX Tether" to the PC.
1
Connect the computer and camera with the USB connection cable (supplied).
• Please turn on this unit and your PC before connecting.
• Do not use any other USB connection cables except the supplied one.
A [USB/CHARGE] socket
B USB connection cable (supplied)
2
Press 3/4 to select [PC(Tether)], and then press [MENU/SET].
• If [USB Mode] is set to [PC(Tether)] in the [Setup] menu in advance, the camera will be
automatically connected to the PC without displaying the [USB Mode] selection screen.
3
Use "LUMIX Tether" to operate the camera from the PC.
• When the camera is connected to the PC via [PC(Tether)]:
– The camera will be set to Recording Mode.
– Wi-Fi/Bluetooth function cannot be used.
– [ ] is displayed on the screen.
104
DVQX1324 (ENG)
Windows
Mac
USB port (Super Speed USB (USB 3.0))
®
Windows 7, Windows
OS X v10.10 to v10.11, macOS 10.12
– Instead of the number of recordable
pictures, [PC] will appear on the screen if
you perform recording without inserting a
card into the camera.
® ®
8.1, Windows 10