Yamaha YXZ 1000 R SS 2023 Owner's Manual page 144

4. Remove the engine oil tank filler cap and
wipe the dipstick with a clean rag.
2
3
4
5
1. Engine oil tank filler cap
2. O-ring
3. Engine oil dipstick
4. Maximum level mark
5. Tip of the engine oil dipstick
9
5. Insert the dipstick back into the oil tank
(without screwing it in), and then remove
it again to check the oil level.
6. If the oil level is below the tip of the dip-
stick, add oil.
TIP
Add oil a little at a time so as not to overfill be-
yond the maximum level mark.
7. Check the O-ring for damage, and re-
1
place it if necessary.
8. Install the engine oil tank filler cap.
9. Install the panel.
To change the engine oil
1. Park the vehicle on a level surface.
2. Remove panel D. (See page 9-10.)
3. Remove the engine oil tank cover by re-
moving the bolts.
9-18